In the construction world, there are many standards and requirements that dictate how a job must be done for specific tasks.
Construction work falls under two major categories: the Department of Justice and the Department of Transportation. As a result, both of these two departments have their own rules and regulations applicable to the construction classified beneath them.
The regulations of the Department of Justice are referred to as the 2010 ADA Standards, and the Department of Transportation’s rules are governed simply by the ADA Standards.
Before beginning new construction under either of these two departments, it is vital to know the rules, regulations, and applications of both.
1. Scoping Requirements
“Scoping” is a term used very frequently in the construction industry, and it refers to the general way a construction job or project is going to be carried out under the signing of a specific contract.
Both the 2010 ADA Standards and the ADA Standards have different requirements for scoping construction.
Firstly, scoping requirements apply to four particular areas of construction. These are elements, building, facility, and site.
Each is applicable by the Department of Justice’s 2010 ADA Standards and the Department of Transportation’s ADA Standards.
Additionally, there are other scoping requirements for technical provisions and covered elements and spaces that a site provides.
These elements and spaces are parking, means of egress, and plumbing fixtures.
For the 2010 ADA Standards, their requirements are determined by either building codes, design practices, or other factors.
The ADA Standards of the Department of Transportation, on the other hand, list the particular areas, elements, and spaces that are required to be accessible.
2. ADA Standards Application
The Department of Justice and the Department of Transportation both have a set of standards specifically for the application and accessibility of a new construction site.
As for the ADA Standards, requirements apply to all types of facilities, regardless of size or complexity. This means that all facility sites, from simple, one-building facilities to complex sites containing multiple buildings, are all subject to the same rules.
These application regulations also apply to exterior and interior spaces, as well as all elements a site provides.
Additionally, whether these sites are permanent or temporary does not matter. The rules apply to both.
3. Accessibility Regulations
It is important to note that for all new construction, it is mandatory by the ADA Standards that all areas to be fully accessible, which normally means having multiple spaces of the same type.
However, the only three areas not required to be fully accessible or only partially accessible are as follows:
- Raised or limited usage spaces
- Specific employee work areas
- Spaces specifically for scoping provisions of which only particular portions are required to comply
The “particular portions” referred to in number three is areas such as dressing rooms or patient bedrooms, because they are only partially accessible.
Knowing the ADA Standards Ensures Your Construction Work Is Safe, Legal, and Successful
You never want to end up in a situation where you have the ADA on your back because you’ve fallen short of expectations!
Before starting your construction, take precautions and be fully aware of the laws and regulations applicable to your site.
This makes for a happy business, happy customers, and a happy Department of Transportation.
Help with ADA Compliance
Serving clients in New Jersey, New York and Eastern Pennsylvania, the experienced professionals at East Coast Paving and Site Development are prepared to help you achieve the standards for ADA compliance.
For additional questions about ADA compliance, contact the paving experts at East Coast Paving and Site Development at 732-329-3600 or email firstname.lastname@example.org.